The compact orifice Oriflow is used for flow measurements of conductive and non-conductive fluids, gases and vapours in all industrial branches.
Our strategic business unit (SBU) METRA Energie-Messtechnik has taken over this area. Our team will be happy to answer any questions you may have.
Application:
Applications include flow measurements (volume / Mass) for balancing (compressed air systems, heat carries, vapours, chemical products, for examples), process control and high throughput applications, redundant solutions for safety applications
Technical data
| Nominal size | DN15 to DN300 (1/2“ to 12“), bigger sizes on request |
| Process connection | Sandwich, Flanges according to DIN or ANSI |
| Material | Stainless steel, Hastelloy, Tantalum, Titan, PVDF, Monel |
| Flow Range | 0.2 to 150,000 m³/h (52.83 to 39,625808 gal/h) |
| Accuracy | up to ±0,6% |
| Process temperature | -40°C up to +400°C (-40°F up to +752°F) |
| Process pressure | up to PN100 (up to 320 bar / 4,641 psi on request) |
| Output signal | current output / Foundation Fieldbus / Profibus A |
| Ex-protection | Flame proof or intrinsically safe |
Special features
- dry calibration
- high repeatability
- easy installation without pressure lines
Characteristics
- highest market acceptance already over 10,000 units in operation worldwide
- extremely rugged and stable measuring instrument
- suitable for extreme applications
Product Variants Oriflow
| Main Features | Options | |||||||||||
| Nominal Size available (in DIN or ANSI) |
Dimension / Standard |
Nominal Pressure available |
Temperature Range | Material available | Valve Block | Valve Block new |
Steam Angle horizontal |
Steam Angle vertical |
Pressure seals | others | Special Features | |
| Model D | DN15 – 150 1/2″ – 4″ |
70 mm | max. PN63 Class 600 |
-20° – 170°C (-4° – 338°F) |
1.4408, 1.4409 | X | X | X | only as cast version / with steam angle up to 280°C (536°F) | |||
| Model D | DN200 – 1000 5″ – 40″ |
40 – 60 mm | max. PN63 Class 600 |
-20° – 170°C (-4° – 338°F) |
1.4571, 1.4404 or special |
X | X | X | X | with steam angle up to 280°C (536°F) | ||
| Model G | DN4 – 15 | 150 mm | max. PN40 | -20° – 170°C (-4° – 338°F) |
1.4571 | X | X | X | ||||
| Model I | DN15 – 150 1/2″ – 4″ |
25 mm | PN40 Class 600 |
-20° – 170°C (-4° – 338°F) |
1.4571 | X | X | X | ||||
| Model L | DN6 – 150 1/2″ – 6″ |
max. PN325 Class 2500 |
-20° – 170°C (-4° – 338°F) |
1.4571, 1.4404 or special |
X | X | X | with steam angle up to 280°C (536°F) / lens seal or ring joint | ||||
| Model M | DN6 – 125 | max. PN325 | -20° – 400°C (-4° – 752°F) |
1.4571 | X | |||||||
| Model N | DN15 – 150 1/2″ – 4″ |
40 – 60 mm | max. PN63 Class 600 |
-20° – 170°C (-4° – 338°F) |
1.4571, 1.4404 | X | X | X | X | |||
| Model O | DN15 – 200 1/2″ – 6″ |
60 mm | max. PN160 Class1500 |
-20° – 170°C (-4° – 338°F) |
1.4571, 1.4404 or special |
X | X | X | with steam angle up to 280°C (536°F) | |||
| Model S | DN150 – 1000 2″ – 20″ |
max. PN100 Class 900 |
20° – 400°C (-4° – 752°F) |
1.4571, 1.4404 or special |
X | X | first shut-off as single or double welded version | |||||
| Model T | DN15 – 500 | 60 mm | max. PN40 | -20° – 170°C (-4° – 338°F) |
1.4571, 1.4404 or special |
X | temperature extension | |||||
| Model U | DN15 – 500 1″ – 20″ |
max. PN100 Class 900 |
20° – 400°C (-4° – 752°F) |
1.4571, 1.4404 or special |
X | |||||||
| Model Z | DN15 – 150 1/2″ – 4″ |
25 mm | PN40 Class 600 |
-20° – 170°C (-4° – 338°F) |
1.4571, 1.4404 or special |
X | X | X | ||||
| ORIKON | DN15 – 250 | 65 mm | PN40 | -20° – 350°C (-4° – 662°F) |
1.4571, 1.4404 | |||||||
- Oil and Gas
- Chemistry and pharmaceutical
- Mechanical and plant engineering
- Energy and power plants
